an ideal diesel cycle has a compression ratio of 20


questioned by administrator @ in Engineering viewed by 135 People


An ideal Diesel cycle has a compression ratio of 17 and a cutoff ratio of 1.3. Determine the maximum temperature of the air and the rate of heat addition to this cycle when it produces 140 kW of power and the state of the air at the beginning of the compression is 90 kPa and 578C. Use constant specific heats at room temperature.

Answered by administrator @



Answer:

maximum temperature = 1322 k

rate of heat addition = 212 kw

Explanation:

compression ratio = 17

cut off ratio = 1.3

power produced = 140 Kw

state of air at the beginning of the compression = 90 kPa and 578 c

Determine the maximum temperature of air

attached below is the detailed solution


Do you know the better answer?

Latest questions in Engineering

an ideal otto cycle has a compression ratio of 7

Questioned by administrator @ in Chemistry viewed by 65 persons

An ideal Otto cycle has a compression ratio of 7. At the beginning of the compression process, P1 = 90 kPa, T1 = 27°C, and V1 = 0.004 m3. The …
View 1 answer

an ideal otto cycle has a compression ratio of 8

Questioned by administrator @ in Physics viewed by 50 persons

An ideal Otto cycle has a compression ratio of 8. At the beginning of the compression process, air is at 100 kPa and 17°C, and 800 kJ/kg of heat is …
View 1 answer

an ideal vapor compression refrigeration cycle that uses refrigerant 134a

Questioned by administrator @ in Engineering viewed by 127 persons

An ideal vapor-compression refrigeration cycle that uses refrigerant-134a as its working fluid maintains a condenser at 800 kPa and the evaporator at −12°C. Determine this system's COP and the amount …
View 1 answer

what is the compression to rescue breath ratio for adults

Questioned by administrator @ in Biology viewed by 71 persons

During cpr, what is the ratio of chest compressions to rescue breaths in adults?
View 1 answer

what is the ratio of chest compressions to rescue breaths

Questioned by administrator @ in Biology viewed by 58 persons

During cpr, what is the ratio of chest compressions to rescue breaths in adults?
View 1 answer

coefficient of compressibility of soil is the ratio of

Questioned by administrator @ in Environmental Sciences viewed by 81 persons

Coefficient of compressibility of soil is the ratio of
View 1 answer

a vapor compression refrigeration cycle operates at:

Questioned by maham237 @ in Engineering viewed by 82 persons

10.6 An ideal vapor-compression refrigeration cycle operates at steady state with Refrigerant 134a as the working fluid. Saturated vapor enters the compressor at 2 bar, and saturated liquid exits the …
View 1 answer

a vapor compression refrigeration cycle operates at

Questioned by maham237 @ in Engineering viewed by 92 persons

A vapor-compression refrigeration cycle operates at steady state with Refrigerant 134a as the working fluid. Saturated vapor enters the compressor at 2 bar, and saturated liquid exits the condenser at …
View 1 answer

water is the working fluid in an ideal rankine cycle

Questioned by administrator @ in Engineering viewed by 16 persons

Water is the working fluid in an ideal Rankine cycle. Saturated vapor enters the turbine at 16MPa, and the condenserpressure is 8kPa. The mass flow rate of steam entering theturbine …
View 1 answer

what is the ratio of compressions to breaths in cpr

Questioned by administrator @ in Health viewed by 94 persons

---------1. What is the ratio of compressions to breaths in CPR? 10 to 2 15 to 2 20 to 2 30 to 2 ---------2. When choosing health products and services, …
View 1 answer

an ideal gas at atmospheric pressure is adiabatically compressed

Questioned by administrator @ in Physics viewed by 72 persons

An ideal gas at pressure p is adiabatically compressed so that its density becomes n times the initial value. The final pressure of the gas will be
View 1 answer

an ideal gas is taken around the cycle abcda

Questioned by administrator @ in Physics viewed by 56 persons

an ideal monatomic gas is taken round the cycle ABCDA as shown. calculate the work done during the cycle
View 1 answer

an ideal gas at pressure p is adiabatically compressed

Questioned by administrator @ in Physics viewed by 59 persons

An ideal gas at pressure p is adiabatically compressed so that its density becomes n times the initial value. The final pressure of the gas will be
View 1 answer

two moles of an ideal gas was compressed adiabatically

Questioned by administrator @ in Chemistry viewed by 62 persons

Two moles of an ideal gas (cv = 5r/2) was compressed adiabatically against constant pressure of 2 atm. Which was initially at 350k and 1atm pressure. The work involved in …
View 1 answer

an ideal gas is taken around the cycle abca

Questioned by administrator @ in Chemistry viewed by 50 persons

An ideal gas is taken through a cycle A-B-C-A as shown in figure.If net heat supplied to the gas in the cycle is 5J the work done by the gas …
View 1 answer

Most viewed questions in Engineering


in this course glossary terms are highlighted in drivers ed

Questioned by administrator @ in Engineering viewed by 1698 persons


arrange the events from hamlet in the order in which they occur, from first to last.

Questioned by maham237 @ in Engineering viewed by 898 persons



tailor rolled parts may be used for collision energy management

Questioned by administrator @ in Engineering viewed by 547 persons



one pound mass of water fills a 2.4264

Questioned by maham237 @ in Engineering viewed by 374 persons


an inductor has an inductance of 0.025 h

Questioned by maham237 @ in Engineering viewed by 312 persons



230 volt hair dryer

Questioned by maham237 @ in Engineering viewed by 241 persons


batteries are used to power radios watches and cell phones

Questioned by administrator @ in Engineering viewed by 228 persons



which of these aquatic terms is a palindrome?

Questioned by administrator @ in Engineering viewed by 217 persons


who does the writer think was the best english monarch?

Questioned by maham237 @ in Engineering viewed by 217 persons


cp to kg ms

Questioned by maham237 @ in Engineering viewed by 214 persons